Levolor Faux Wood Blinds
Levolor Faux Wood Blinds
Want the look of real hardwood blinds in your facility, at a fraction of the price? You’ll love the quality craftsmanship and durability of our faux wood blinds. They’re a realistic-looking substitute to wood blinds that you can easily afford. And because they are not real wood, the colors won’t fade in the sun. Choose faux wood blinds for strength and stability—and be at peace with both Mother Nature and your budget.
Faux Wood Collections
Nuwood Composite Collection
♦ Resist scratching and effects of intense sun and/or moisture.
♦ Perfect for areas such as bathroom, kitchen, sunroom and garage.
♦ Coordinate with Premium Real Wood Collections.
♦ Levolor NuWood™ Composite blinds provide the warmth of real woods color and grain with the performance of advanced materials. Ideal for areas with intense sun exposure and high humidity, the composite formular provides greater strength and stability. Scratch and dust resistant outer shell is easy to clean. Available in 2″ slat size.
Visions Faux Wood
♦ Moisture resistant
♦ Economical choice
♦ Designed to resist moisture and fit into your budget, the Visions™ Faux Wood offers many choices to complement your style. Available in 2″ and 2 1/2″ slat sizes.
Minimum and Maximum Width Limitations
- 2″ NuWood
Composite Inside Mount
Minimum Width Inside Mount
Minimum Width Outside Mount
Minimum Width Outside Mount
Minimum Width - Tilt and Lift Controls
-Opposite Side 10-1/4″ 96-1/2″ 10″ 96″ - Tilt Control in Center-No Lift Control 9-1/2″ 10-1/4″ 9-1/4″ 10″
- No Tilt and Lift Controls; Slats in Open Position 6-7/8″ 9-1/2″ 6-5/8″ 9-1/4″
- 2″ NuWood
Composite Inside Mount
Minimum Width Inside Mount
Minimum Width Outside Mount
Minimum Width Outside Mount
Minimum Width - Tilt Control in Center-No Lift Control 9-1/2″ 10-1/4″ 9-1/4″ 10″
- No Tilt and Lift Controls; Slats in Open Position 6-7/8″ 9-1/2″ 6-5/8″ 9-1/4″
Ladder and Cord Count Charts
- 2″ NuWood
Composite Inside Mount
Minimum Width Inside Mount
Minimum Width Outside Mount
Minimum Width Outside Mount
Minimum Width - Tilt and Lift Controls
-Opposite Side 10-1/4″ 96-1/2″ 10″ 96″ - Tilt Control in Center-No Lift Control 9-1/2″ 10-1/4″ 9-1/4″ 10″
- No Tilt and Lift Controls; Slats in Open Position 6-7/8″ 9-1/2″ 6-5/8″ 9-1/4″
We are offering the following selections :
NuWood™ Composite
Chenille
Chestnut
Cheyenne Red
Colonial-Pine
Dover
Dover Embossed
Golden Oak
Honey Maple
Pecan
Pure White
White White
White White Embossed
Visions™ FauxWood
Cream
Honey Pine
Lush Oak
Mahogany
Maple
Pacific Sand
Sand Sandblasted
Ultra White
Ultra White Sandblasted
Walnut
White
White Sandblasted
12067107-Pecan
12067501 Pecan
Birch
Cherry
Options Chart
Upgrades
- 2″ NuWood 2″ Visions Faux Wood 2 1/2″ Visions Faux Wood
- Light Master O O O
- Cord Tilt S” S S S
- Wand Tilt O O –
- Standard Braided Ladder S S S S
- Cut Outs O O O
Choose Your Upgrades & Options
Upgrades
Lightmaster
Maximum light control.
A no rout hole design blocks light and prevents outside see through.
Available in NuWood™, and Visions™.
Lightmaster
Allows access to air conditioners, window cranks, etc.
Center and side cutouts are available.
A diagram may be required.
-
Multiblinds per Headrail
Provides the flexibility of raising one blind while keeping the other lowered on extra wide windows or patio doors.
Two or three blinds on one headrail are available up to a total maximum width of 144″.
Minimum innerspace is 1/2″ between blinds.
Horizontal slat alignment not guaranteed.
Options
Customize your blind to suit your style and decor with any of our options
Lightmaster
Maximum light control.
A no rout hole design blocks light and prevents outside see through.
Available in NuWood™, and Visions™.
Cord Tilt
Traditional control.
Hold Down Bracket
Keep blinds in place when opening and closing your door. Request at time of order.
Questions are good answers are BETTER !
1. Q: What do I do if the slats will not tilt or turn on my blind?
A: It’s possible to continue turning the wand even if your slates are in a fully closed position – this is a protective feature that prevents the mechanism from breaking. However, if the blind is small, the tilter can potentially disengage. To re-engage the tilter if the slates are closed in a down position, turn the wand counter clockwise and at the same time pull down gently on the back string of the ladders (supporting the slats). If the slats are closed in the up position, turn the wand clockwise and gently pull down on the front string of the ladders. If the above steps do not correct the problem contact customer service for a return authorization number and repair costs or warranty coverage.
2. Q: Can I order additional slats for my blind?
A: Additional slats are available for purchase. To order, just contact us by clicking this link. Before you order, take a minute to measure your blind. You’ll need to know the width of the slat, as well as the route hole measurements, starting from the left of the blind working to the right.
3. Q: How do I shorten my blind control cords?
A: All control cords are normally 1/2 the length of the blind when manufactured. If you feel your control cords are too long, you can follow these steps to shorten.
Fully lower the blind, and then push the control cords through the tassel to expose the knot.
Move tassel up the cords to the desired end position, and then tie a new knot below the tassel. Make sure the knot is large enough to hold the tassel in place and prevent cords from slipping through.
Test new tassel location and cord length by raising and lowering the blind. If you are satisfied with new knot position, cut off the excess cord below the new knot.
